BD-305 Agate Kutter Diamond blades have been designed to cut a variety of hard lapidary materials on high speed water cooled tile and brick saws with minimal chipping. There are other factors that should be considered when choosing a diamond blade for a particular application. These include the type of the blade, the availability of water in the cutting process, the horsepower of the saw, and the acceptable level of noise created by the saw. For example, if the horsepower of a saw machine is large, the diamond concentration of the diamond blade should be higher, or the bond should be harder. Higher diamond concentration will decrease the impact on each single diamond in working, while a harder bond will hold the diamonds more firmly. Blades typically have rectangular teeth which contain diamond crystals embedded throughout the segment for grinding through very hard materials.

Fine & uniform grit – perform excellent cuts and nearly eliminate chipping on both the surface of the glass tile and its other side. GREEN blades are notched-rim blades for general lapidary such as slabbing. Hard edge flexible back with extra thickness (.032) for extra rigidity, strength and blade life in the woodworking industries, particullarly furniture manufacturers. Unique tooth design for cutting larger structural shapes such as I-beam, angle and thick wall tubing. Tooth profile delivers aggressive cutting performance while resisting tooth strippage. Unique group tooth set along with the broach tooth design, delivers smoother cuts with less noise and vibration. Dexpan is a cement with amazing 18,000 psi expansive strength when mixed with water. Poured into pre-drilled holes, Dexpan can crack and split concrete and rocks safely and quietly, while providing silent cracking. Concrete removal, rock breaking and stone quarrying, mining has never been easier with Dexpan Non-Explosive Demolition Agent. Click here to check out news, updates and case stories related to our products.

Tuckpointing diamond saw blades remove weathered and damaged mortar. They are generally used in a grinder or specialized tuckpointing tool. Two blades are used side-by-side to remove a wide band of material. They are used by firefighters and first responders and are often used to cut through vehicle wreckage. Sterling® offers a complete range of bandsaw materials in various widths, pitches and tooth configurations for most cutting applications. We have a full offering of Carbide Tipped material, M-51, M-42, and Matrix bi-metal material. We also offer a full line of Carbon Hard Edge Hard Back and Hard Edge Flex Back material.

They are made by notching the rim of the blade blank and embedding the diamonds into the notches. The code, which is in a three-letter format separated by dashes, will be permanently imprinted on the blade. And it will tell you at a glance whether the blade is for wet or dry use, what type of material it can cut, and the saw type it’s designed to work with. Expect to pay several hundred dollars or more, depending on the blade diameter. If that’s more than you’re willing to invest for an occasional cutting job, consider hiring a professional sawing contractor to do the work. To locate a contractor in your area, visit the member directory of the Concrete Sawing & Drilling Association . The metal core, a precision-engineered steel disk with a segmented rim that holds the diamonds.

However, these are not the diamonds found in engagement rings – thank goodness. They are typically synthetic and produced through high-pressure, high-temperature synthesis in order to produce the most efficiency for cutting. The bond varies between different levels of softness and hardness, and in addition to giving a base for the diamonds, the bond allows for a specific wear rate to match the material being cut. We added this section to the article after reader posed the question of when to use segmented blades versus continuous rim blades. The answer is that it depends a number of variables, including the material being cut, the speed of the cut, the finish quality, and availability of water. These areas serve important functions—namely, heat dissipation and debris removal. Continuous rim blades are wet cutting blades that operate very slowly but provide the cleanest cuts. This is important when working with very brittle materials or when the cut edge will be exposed. Both blades are suitable for cutting concrete, masonry, pavers and the like.

such small diameter blades use sintered and Vacuum Brazed welding, they need more sharp. Glass is a beautiful and translucent material but is also Hard and brittle. Because of this glass requires a very abrasive blade with very cool properties to reduce heating of the blade. Most diamond glass blades are made with very fine diamonds implanted into the rim of the blades segment. Glass blades in almost all occasion continuous rim to reduce aggressive friction which may cause cracks or harsh rough cuts. Tenax marble bridge diamond saw blades supplier are designed in such a way that they wear correctly and perform well.

Leave a Comment

Your email address will not be published. Required fields are marked *